Marathon Belting Ltd. from the U.K. is committed to continuous development and production for a wide range of woven products used in the aluminum extrusion handling system.

  • Continuous development and production of a range of woven products within ultimate design parameters for use on aluminum extrusion handling system.

  • The maximum efficiency of manufacture coupled with the most competitive sourcing of raw materials to enable us to supply the industry at 'no nonsense' price levels.

  • Heavy investment in stock to allow us to despatch a wide range of sizes within minimum delivery periods.

  • Extensive quality control throughout all stages of manufacture and all inspection records are kept for a minimum period of three years in accordance with registration to ISO9001:2000.

　

 　

Gold Roller Sleeve

　

For the Initial Run-out area (hot zone). With the high temperature/flame resistance and thermal stability of PBO fiber, the maximum contact temperature is in the order of 600℃.

Red Roller Sleeve

For the Initial Run-out area. Enhanced woven roller performance by the application of a high pressure impregnation of specially formulated resins which are compressed to further increase density after curing. After external grinding, the outside surface of the roller has a smooth texture which will not mark hot profiles leaving the press.

Green Roller Sleeve

For the run out table from the gold roller sleeves. Their operating contact temperature is around 500℃ making them ideally suitable for most roller positions along the run out system.

Blue Roller Sleeve

For the cold side of handling system. Impregnated with newly developed low cost resins yet tough. With ability to resist temperatures up to 250℃.

Standard Specification for Roller Sleeves

　

ID

　

   OD

mm

Inches

mm

Inches

48.26

1.90

58

2.28

60.3

2.37

70

2.75

76.2

3.00

85

3.35

80.0

3.15

90

3.54

88.9

3.50

98

3.86

101.6

4.00

111

4.37

114.3

4.50

124

4.88

127.0

5.00

135

5.32

　
TRITON High Temperature Belt

For Run-out, Transfer & Cooling. Belts are woven from Triton yarn which is a blend of aramid fibres with oxidised polyacrylonitrile fibres giving ulimate resistance to the extreme abrasive action of the sawn extruded profiles at temperatures in the order of  500℃(930℉).

TRITON Walking Beams

　

Marathon high temperature materials are ideal for adhesion to walking beams and moving runout slats to reduce the risk of marking profiles.
POLYESTER Low Temperature Belt

For Stretcher Feed & Batching. There are many areas of extrusion handling plants, such as stretcher feed and batching belts, where woven polyester can be used with excellent results. Temperature resistance is excellent at 180℃(350℉) and the low coefficient of surface friction allows extrusions to move freely without strain on the belt system.

Standard Specification for Belts

Standard belt widths are 80mm, 100mm, 150mm,200mm; standard thickness are 4.5mm, 6mm and 8mm.

Download Customer Specification Sheet

Fax back to us after filled, get more professional technical information.