Pyroform E-Z Pour^TM - Non-Wetting Refractory Back-Up Material

Pyroform E-Z Pour™ is a pourable, granular material specifically designed for use as back-up insulation in irregular areas where conventional insulation materials (blankets and boards) cannot fit. Pyroform E-Z Pour is simple to install and requires no mixing, drying or curing. In fact, equipment can go into service immediately after the installation is complete. In addition, Pyroform E-Z Pour has a low
thermal conductivity and excellent resistance to molten aluminum. These features make Pyroform E-Z Pour an ideal choice for casting tables, distribution launders, and transfer launder systems.

Installing Pyroform E-Z Pour is as easy as 1-2-3. After setting the refractory lining in place, simply:

1. Plug any holes or crevices that may allow the Pyroform E-Z Pour to spill out.

2. Pour Pyroform E-Z Pour into gaps behind working lining.

3. Cover the filled area to prevent spillage and contamination.

That's all there is to it – no mixing, no drying, no hassle.

Removal of Pyroform E-Z Pour is just as easy. After removing the old refractory, simply sweep or vacuum the Pyroform E-Z Pour and you're done.

Pyroform E-Z Pour is supplied in convenient five gallon containers which hold 22lbs. (10kg) of material or economical bags that hold 60lbs. (27 kg) of material. Each five gallon container is equipped with a handy pouring spout to make the installation even easier. An optional spout extension (as shown) is available for hard to reach areas. If alternate
packaging is required, contact our Customer Service team to discuss other options.

Copyright Amkes,Inc.